Fix | Issue
Date | Symptom |
|---|
| EP73B001 |
12/02/10 |
Create new ptf file | |
| EP73B002 |
12/02/10 |
Error message EPM10 displays as EPMEPM10 in error | |
| EP73B003 |
12/15/10 |
User contributed REXX routine using TSIDAC2 to read and display all volumes associated with a specific dataset name in the BIM-EPIC catalog | |
| EP73B004 |
01/24/11 |
Sort the EJECT records for ACL controlled volumes | |
| EP73B005 |
02/11/11 |
The table for catalog addresses is too small and can create different type of cancellations, I/O error, data exeption, etc | |
| EP73B006 |
04/26/11 |
Bypass bulk processing calls for VTAPE volumes | |
| EP73B007 |
04/26/11 |
Do not issue EP066 if uncontrolled disk file and EPS110=YES | |
| EP73B008 |
04/26/11 |
Record size 4 bytes more than it should be for variable files | |
| EP73B009 |
05/20/11 |
OFFLOADED disk files could create Invalid SVC 6B after EP72B057 | |
| EP73B010 |
05/27/11 |
Checking of device busy during ACL AVR creates MOUNT message because after ATTACH it takes too long for the IBM AVR routines. | |
| EP73B011 |
05/27/11 |
Increase the TLBL version number to 4 digits from 3 | |
| EP73B012 |
06/17/11 |
If using UNIT=EEFM with 3592 Encrypted tapes it gets MOUNT message instead of finding available drive | |
| EP73B013 |
06/17/11 |
Fix Segment Translation Exception opening a VSAM ACB on z/VSE 4.3 systems | |
| EP73B014 |
06/17/11 |
Increase the max number of tape volumes to 200 from 100 for the OFFLOAD system | |
| EP73B015 |
07/15/11 |
PTF EP73B012 had an error that caused the Privilege Operation Exception | |
| EP73B016 |
07/29/11 |
EP73B013 in error will not release getvis when using subtask | |
| EP73B017 |
09/22/11 |
Use TSIDTASK to pass updates to VTA serverand do not do read after the LOAD/DISPLAY command, have to set EPS114=YES to activate. | |
| EP73B018 |
09/22/11 |
Bypass reblocking for DTFPH and use DBLSERNO instead of DSFSERNO for GETVCE for Start Track1 files | |
| EP73B019 |
12/02/11 |
PTF EP73B007 had a hard branch instead of a branch equal and that created the 4459D error when the invalid pool name was replied to the EP066 message. | |
| EP73B020 |
12/02/11 |
z/VSE 5.1 version changes | |
| EP73B021 |
12/09/11 |
PTF EP73B014 was incompleted | |
| EP73B022 |
12/09/11 |
EP73B019 was incompleted | |
| EP73B023 |
01/06/12 |
Protection Exception in $ACLSRV while checking for pool name | |
| EP73B024 |
05/11/12 |
EPT590W VTA ACL SCRTCH ERROR RC=40 with Universal Software VTA after applying PTF EP73B017 | |
| EP73B025 |
07/06/12 |
EP088 DISMOUNT CARTRIDGE message issued for scratch tapes when using VTS Fast Ready support. With this patch, the special option EPS014=NO must be set or defaulted to. | |
| EP73B026 |
10/05/12 |
Add 'EXP' parameter to the RETAIN command to change the expiration date of a version by the expiration date + the number of days expecified in the EXP parameter, also change the TSIO0120 panel to have a 'Days + EXP' in order to use this new parameter. | |
| EP73B027 |
10/17/12 |
0S17I EXECUTION MODE VIOLATION - SVC CODE HEX 70 issued on pre-ESA 3.0 systems after EP079 message or when using ACL support but the drives or the dataset has the wrong mode setting, | |
| EP73B028 |
10/19/12 |
Add a new genenric way to DELETE files by ignoring any part of file name where a / is use in the control cards | |
| EP73B029 |
10/26/12 |
PTF EP73B028 checking 1 byte less than needed deletes incorrect file | |
| EP73B030 |
10/26/12 |
File override cards not honored unless it is undefined file | |
| EP73B031 |
11/21/12 |
TPAMODE not working as documented, changed it to work as documented. | |
| EP73B032 |
11/30/12 |
TSIDINIT issues EP174 if cuu is DVCDN in error. | |
| EP73B033 |
01/04/13 |
TSIDOFC COPY give EP618 in error because table is too small | |
| EP73B034 |
01/18/13 |
TSIDEXE did not account for a program entry address to be different than the load address | |
| EP73B035 |
02/22/13 |
Change the max number of files to copy to 100,000 | |
| EP73B036 |
03/15/13 |
GDIUR using big TLBL name get EP011 in error | |
| EP73B037 |
03/15/13 |
Implement EPS115 to bypass catalog updates on ACL systems if TSIDTASK not running on that system | |
| EP73B038 |
04/05/13 |
Do not update ACLNAME in $ACLSRV if ACL is LEVELED | |
| EP73B039 |
04/05/13 |
EP73B037 in error, new phases require | |
| EP73B040 |
04/12/13 |
Using DD DUMMY is SYSnnn assigned to ignore already it will assign it to UA in error | |
| EP73B041 |
04/17/13 |
EP73B038 had the TSIDSRV phase from BIM-EPIC 7.2B instead of the 7.3B phase so when activating user gets EP494 | |
| EP73B042 |
04/18/13 |
EP73B038 did not account for input files, for input it needs to update the ACLNAME | |
| EP73B043 |
05/15/13 |
BLKZISE=MAX with COBOL/VSE for TAPE gets CEE3756S error, the reason is that LE can not handle a blksize greater than 65534 and MAX uses 65535 normally, change TSIDELE to use 65534 instead. | |
| EP73B044 |
08/16/13 |
If releasing ownership at EOJ for a VTAPE and a regular tape I/O error happens because CCW area ovelayed with VTAPE STOP STOP command. | |
| EP73B045 |
08/30/13 |
Invalid SVC on SVC 111 if VM=YES and drives left owned at EOJ | |
| EP73B046 |
10/08/13 |
If a leveled ACL is OFFLINE and it is first in the TSIDPOL tape pool for that set of leveled ACL's a mount is issued instead of automatically mounting the volume needed | |
| EP73B047 |
10/08/13 |
0S17I Execution Mode Violation scratching disk at EOJ | |
| EP73B048 |
11/27/13 |
Add a check for an OFFLINE ACL to bypass it before trying a SYNC | |
| EP73B049 |
12/19/13 |
CVF shows VTOC errors because output area not cleared between puts. | |
| EP73B050 |
01/16/14 |
TSIDJOB could leave the partition in 31bit in error | |
| EP73B051 |
01/16/14 |
$PARSE did not address TSIDSVA correctly causing EPTRACE to show up when trace was not turned on | |
| EP73B052 |
03/27/15 |
The year 3000 displays as 2000 in error | |
| EP74B001 |
01/25/13 |
Create new PTF file for BIM-EPIC 7.4B | |
| EP74B002 |
02/22/13 |
Change the number of COPY files to 100,000 | |
| EP74B003 |
03/15/13 |
GDIUR using BIG TLBL name get EP011 in error | |
| EP74B004 |
03/15/13 |
Implement EPS114 to bypass catalog updates on ACL systems if TSIDTASK not running on that system | |
| EP74B005 |
03/15/13 |
PTF EP74B004 was using EPS114 instead of EPS115 check in TSIDTCHK, EPS114 was already used for VTA support | |
| EP74B006 |
04/05/13 |
Do not update ACLNAME in $ACLSRV if ACL is LEVELED | |
| EP74B007 |
04/05/13 |
EP74B004 in error, new phases require | |
| EP74B008 |
04/12/13 |
Using DD DUMMY is SYSnnn assigned to ignore already it will assign it to UA in error | |
| EP74B009 |
04/15/13 |
EP494 error after applying EP74B006 due to incorrectly linked TSIDSRV phase. | |
| EP74B010 |
04/18/13 |
EP74B006 did not account for input files, for input it needs to update the ACLNAME | |
| EP74B011 |
05/15/13 |
BLKZISE=MAX with COBOL/VSE for TAPE gets CEE3756S error, the reason is that LE can not handle a blksize greater than 65534 and MAX uses 65535 normally, change TSIDELE to use 65534 instead. | |
| EP74B012 |
06/21/13 |
Implement EPS114 for TSIDVTAA to avoid READ after MOUNT | |
| EP74B013 |
08/16/13 |
If releasing ownership at EOJ for a VTAPE and a regular tape I/O error happens because CCW area ovelayed with VTAPE STOP STOP command. | |
| EP74B014 |
08/30/13 |
Invalid SVC on SVC 111 if VM=YES and drives left owned at EOJ | |
| EP74B015 |
10/08/13 |
If a leveled ACL is OFFLINE and it is first in the TSIDPOL tape pool for that set of leveled ACL's a mount is issued instead of automatically mounting the volume needed | |
| EP74B016 |
10/08/13 |
0S17I Execution Mode Violation scratching disk at EOJ | |
| EP74B017 |
11/27/13 |
Add a check for an OFFLINE ACL to bypass it before trying a SYNC | |
| EP74B018 |
12/19/13 |
TSIDCVF shows VTOC errors because output area not creared between puts | |
| EP74B019 |
01/16/14 |
TSIDJOB could leave the partition in 31bit in error | |
| EP74B020 |
01/16/14 |
$PARSE did not address TSIDSVA correctly causing EPTRACE to show up when trace was not turned on | |
| EP74B021 |
06/05/14 |
Different errors if using NSU files with ACL devices. | |
| EP74B022 |
06/05/14 |
Do not rewrite VOL1/HDR1 if using UNCONTROLLED OUTPUT tape | |
| EP74B023 |
06/05/14 |
Getting a DATA EXCEPTION cancellation when doing REPT function because number of BLOCKS field is too small | |
| EP74B024 |
06/05/14 |
Add support for UPSI xxxxx1 to write EP165 messages to SYSLST instead of SYSLOG | |
| EP74B025 |
08/01/14 |
Allow revolving datasets to work on ACL devices | |
| EP74B026 |
09/05/14 |
$ACLSRV cancels at location 0 because R2 not preloaded with address of ACLSERV table | |
| EP74B027 |
09/05/14 |
PTF EP74B026 was not complete, missing one instruction | |
| EP74B028 |
09/12/14 |
DATA EXCEPTION doing a REPT PCT= report | |
| EP74B029 |
10/03/14 |
PTF EP74B028 incomplete | |
| EP74B030 |
10/31/14 |
An ACL SYNC command is issued to TSIDTASK at the end of SCRATCH function if SYNCIBM is set. | |
| EP74B031 |
03/13/15 |
PTF EP74B003 was in error and if using concatenation and GDIUR it droped the first DD card label. | |
| EP74B032 |
03/27/15 |
Year 3000 displays as 2000 in error | |
| EP74B033 |
04/02/15 |
TSIDDIS displys only two digits for version and reel | |
| EP74B034 |
05/22/15 |
The reports show BIM-EPIC 7.3 instead of 7.4 for TSIDUTL | |
| EP74B035 |
08/21/15 |
If TSIDTASK is not running in an ACL environment ACLSRV will keep getting system getvis for the ROLL QUEUE and never release it | |
| EP74B036 |
11/13/15 |
Year 9999 displays as 8099 in error | |
| EP74B037 |
03/04/16 |
PTF EP74B018 incomplete | |
| EP74B038 |
04/08/16 |
MNT TRANSFER can create generation greater than 32767 | |
| EP74B039 |
05/20/16 |
PTF EP73B014 was incompleted and customer was still getting EP659 in error, new Faver2 phases needed to be included | |
| EP74B040 |
07/22/16 |
The IP addres can not have any leading zeros or it is treated as OCTAL | |
| EP74B041 |
11/13/18 |
After EP74B015 ACLs will not MOUNT tapes | |
| EP74B042 |
02/27/19 |
This PTF adds native support for the OPTICA zVT ACL | |
| EP74B043 |
04/11/19 |
PTF EP74B042 incomplete, if OPTICA zVT is only ACL defined it did not get initalized | |
| EP751001 |
09/28/20 |
Initial PTF tape creation for EPIC 7.51. release | |
| EP751002 |
10/27/20 |
TSIDTCHK.PHASE missing from installation TAPE. | |
