Use ZoneSet to create or delete a zone. (See Zones.)
Required Operands
REQ Specify 'S' to set (create) the zone, 'R' to reset (delete) the zone, or 'T' to toggle the zone.
BSCOL specifies the column at which the zone begins.
LMCOL specifies the column at which the zone ends.
Optional Operands
AUSKB Specify 'On' to activate backward auto-skip or 'Off' to inactivate backward auto-skip.
Default: Off.
AUSKF Specify 'On' to activate forward auto-skip or 'Off' to inactivate forward auto-skip.
Default: Off.
Return Codes
OK Successful.
Examples
Create a zone at columns 12-73 with both backward and forward autoship off:
=> ZoneSet S,12,73